LCD Screen	Earpiece	Microphone	Battery cover	Screen protector	Torx T5 Screwdriver	Opening tool

This is our version of how to replace the LCD screen in a Nokia N95 mobile phone. This procedure is fairly straightforward and can be carried out using a Torx T5 screwdriver and optionally an opening tool as shown.

Our N95 handset with a cracked LCD screen.

Open the slider and remove this screw.

And remove this screw.

Move the slider to the landscape positon.

Turn over the phone and remove this screw.

And this one too.

Use the fascia removal shim to remove the LCD cover.

Lift off the LCD front cover.

Put the front cover aside.

Remove the top keypad.

Lift the keypad PCB.

Lift the PCB catch gently to allow removal of the ribbon.

Pull the ribbon cable toward the LCD to remove from the PCB slot.

You're done! Put your replacement LCD in place and re-assemble.

These instructions are provided for information only, we do not accept liability for damage or injury caused through using this guide.